|
Technical Information:... |
||
 |
||
| StockStop Highway Grid | ||
 |
Suitable for highway use, general heavy motor traffic |
|
|
All steel modular design for ease of transport, and handling | |
|
Quick and easy installation |
|
|
Grid and support beams are bolted to a separate kerb frame | |
| |
The grid is in two halves, each of which can be lifted to facilitate cleaning and maintenance |
|
|
All steelwork galvanised to BS 1461 | |
|
2660 mm pit length x any width from 3274mm in 402mm increments x 300mm pit depth...1 | |
|
longer grids suitable for deer can be made to order | |
|
Design is compliant with BS 4008 1991. |
(what is BS4008?) |
|
300kN/m HA loading to BD37/88. |
(what is HA loading?) |
|
30 units of HB loading to BD37/88. |
(what is HB loading?) | |
| (Up to & including 44 tonnes plus abnormal HB loads to 122 tonnes. ) | (HGV limits) | |
|
Versatile drainage options.... | |
|
Outflow can run to either or both sides. Or to a drain set in the base; eg a prefabricated road gully with a 150mm dia outlet or 160mm dia perforated land drain | |
|
Hedgehog friendly design - ramp can be supplied.... | |
|
Hedgehogs can also escape away from the road surface via unused drainage holes in the kerb frame | |
|
The base sections require a Clause 804 sub base consistent with the existing roadway or CBR test, plus a 300mm base of reinforced concrete using a C40 mix to BS 8500 | |
| 1 | Pit dimensions are measured across the inside faces of the kerb frame | |
For Technical Info on our other models:...., Trackway Grid, Driveway Grid